The Innokin Endura Prism T18 II mini kit is the compact version of the Endura Prism T18 II kit. 1000 mAh battery with adjustable airflow located on the top of the battery. 2.5 ml clearomizer with top-filling by unscrewing the top cap. Ultra-high-absorption 1.5 ohm coil.
Innokin Endura Prism T18 II Mini kit
The Innokin Endura Prism T18 II Kit is back in a mini version with metallic colours and a very contemporary graphic effect. Compact, lightweight and discreet, it retains all the benefits of the Innokin range.
The Innokin Prism T18 II clearomizer features a shock-proof metal frame with 4 liquid viewing windows. It's small but tough, with a capacity of 2.5 ml. Easy to fill, the liquid is introduced from the top by unscrewing the top cap. Designed for indirect vaping with a warm vapor. Not very gourmand in liquid, it offers excellent autonomy.
Innokin T18 1.5 ohm coil with numerous feed holes
Supplied with two 1.5 ohm coils compatible with the T18 and T18 II. These coils have large holes for optimum absorption of your liquids, even when the dosage of Vegetable Glycerin (VG) is high. The clearomizer has a magnetic cap that covers the drip tip to prevent impurities from entering.
The battery has a capacity of 1000 mAh and is easily recharged using a micro-USB cable. An airflow on the top of the battery lets you adjust your vape: airy or tight. A charge indicator lets you anticipate when it's time to recharge, so you can vape continuously throughout the day.
It's small but ingenious, with a choice of 3 vaping wattages activated at the touch of a button once your battery has been switched off:
- Led 1: minimum power 10.5 W
- Led 2: medium power 12 W
- Led 3: maximum power 13.5 W
Innokin Endura T18 II Mini complete kit
Calumette's review: A compact, well-designed format that offers everything you need for quality vaping.
E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching on/off your Innokin Endura Prism T18 II mini Kit:
Perform 3 consecutive presses on the swich.
- Recharging your Innokin Endura Prism T18 II mini:
Plug the micro USB cable into the USB port of your computer or wall socket. Plug in your Endura battery by sliding the cover on the bottom of the battery. The LED flashes during charging and goes out once the box is charged.
Charging indicator after each puff :
- Changing the wattage of your Endura battery:
You can select 3 wattages on your Endura battery: 10.5 W, 12 W, 13.5 W. Switch off your battery by pressing the power button 3 times. Then press and hold the power button to select the desired wattage. If the LED lights up on the left, the power will be 10.5 W, in the centre 12 W and on the right 13.5 W. Switch your battery on to select the wattage.
- Filling your Prism T18 II clearomizer:
Unscrew the top cap and fill by introducing the e-liquid along the inside walls of the clearomizer. Then screw back on.
- Changing the coil :
Unscrew the base of the tank and pull on the coil. The coil is not screwed on but clipped onto the clearomizer. Remember to change your coils every 10 to 15 fills. Make sure the clearomizer is empty when you change the coil.
- We suggest you put a few drops of e-liquid on the cotton part of your coil. This will prevent a burnt taste.
- Make sure you respect the Watt operating range of use of your coils.