Innokin Zenith D22 clearomizer
A compact version of the Innokin Zenith clearomizer, with a reduced capacity of 3 ml. With a diameter of 22 mm, it fits most boxes on the market. It is designed exclusively for indirect inhalation. Excellent flavour reproduction and ingenious filling system.
The Innokin Zenith D22 clearomizer filling hatch.
Cleanliness is the watchword: simply turn the top cap a quarter turn to reveal the clearomizer filling slot. An ingenious system closes off the liquid supply to the coil during filling. No more clogged coils or other unpleasant 'gurgling'.
Another advantage of this system is that the coil can be replaced without emptying the tank.
Innokin Z Coil 0.8 ohm.
Three coils available in 0.5 ohm, 0.8 ohm and 1.6 ohm. For lovers of warm vapor, the 0.5 ohm and 0.8 ohm coils are preferable.
Range of use :
Innokin Zenith D22 clearomizer.
Calumette's review: The Zenith in a smaller size! Finally, we've been waiting for it and it's here! Its 22 mm diameter means you can fit it on most boxes.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Filling your Innokin Zenith clearomizer:
Turn the top cap a quarter turn in the direction indicated "open". Pour your liquid into the slot. Close again.
- Changing the coil :
Turn the top cap ring slightly in the "open" direction, without opening the filling slot. Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer and replace the top cap ring in the "close" position. Remember to change your coils every 4 or 5 refills.
- Adjusting the Air Flow :
Turn the Airflow ring to adjust the airflow to your liking. The ring allows you to block more or less the holes through which the air enters the clearomizer. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.
- We suggest you put a few drops of e-liquid on the cotton part of your coil. Once your Zenith clearomizer has been filled with e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer so that the liquid is well impregnated into the coil. This will avoid a burnt taste.
- Make sure you respect the wattage ranges of your coils.