Innokin Endura Prism T20 S kit

The Innokin Endura Prism T20 S is an intermediate kit for those looking for indirect inhalation equipment but with more power. 1500 mAh battery, 2.0 ml clearomizer and Airflow. The Endura Prism T20 S kit is small and portable, so you can take it with you wherever you go.

Innokin Endura Prism T20 S kit

The Innokin Endura Prism T20 S is an intermediate kit for those looking for more power but still for indirect inhalation.

The battery and clearomizer of the Innokin Endura Prism T20 S kit.

Its compact size means you can take it with you wherever you go.

Innokin T20 S clearomizer.

The clearomizer with a capacity of 2.0 ml and the 1500 mAh battery, give a set with a reasonable autonomy. The 0.8 ohm coils are < 1 ohm but are well suited to nicotine strengths up to 12 mg/ml. The 1.5 ohm coils can handle higher nicotine strengths, but the vapor will be a little cooler. Filling from the top is made easier by a removable top cap. Airflow not adjustable.

Innokin Endura Prism T20 S complete kit.

Calumette's review: As always with Innokin a well presented and very effective kit for all types of vaper looking for a tight draw. As an added bonus, the coils provide good vapor production while being able to withstand high nicotine strengths.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Sleek design
• Tight draw, ideal for beginners
• Small format
• Warm vapor
• Top filling

Kit contents

• 1 Endura T20 S battery
• 1 Innokin Prism T20 S clearomizer
• 2 Prism T20 S 0.8 ohm coils
• 1 top cap for drip tip 510
• 1 top cap with integral drip tip
• 1 replacement O-rings kit
• 1 micro USB cable
• 1 French manual

Specifications

• Length: 13.1 cm
• Diameter: 2.0 cm
• Weight : 93 g
• Capacity : 2.0 ml
• 510 screw thread
• Removable plastic drip tip 510 type
• Pyrex tank
• Compatible with Innokin Prism T20 S coils
• Power: 18 W
• Max charge current: 1 A
• Capacity: 1500 mAh
• Coils supplied: 2 Innokin Prism T20 S 0.8 ohm coils
• Power usage: 16 to 18 W for the Prism T20 S coil
• Type of inhalation: indirect
• Type of vapor: tight
• vapor: warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Switching on/off your Innokin Endura Prism T20 S Kit:
Press the swich 5 times in succession.

- Recharging your Innokin Endura Prism T20 S Kit :
Plug the micro USB cable into the USB port of your computer or wall socket. Plug in your Endura battery. The LED will flash while charging and turn off once the battery is charged.

Charging indicator :

• Green LED when pressed: charging between 100% and 60%.
• Yellow LED when pressed: charge between 60% and 20%.
• Red LED when pressed: less than 20% of charge remaining.

- Filling your Prism T20 S clearomizer :
Unscrew the top cap and fill by introducing the e-liquid along the inside walls of the clearomizer. Then screw back on.

- Changing the coil (empty tank):
Unscrew the base of the tank and pull on the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before replacing the tank base. Remember to change your coils every 10 to 15 fills. Note that the clearomizer must be empty when changing the coil.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your T20 S coil. This will prevent a burnt taste.